6kW PIR Movement Detector for use with Infra-red heaters.
The infresco-P 6kW is part of a family of controllers designed to provide energy saving when used with Infrared Lamps. The unit has a built in PIR sensor allowing the lamps to automatically switch on only when people are present. In addition to the PIR, a temperature sensor monitors the outside temperature and inhibits the lamps when the temperature exceeds a pre-determined set point of between 1 and 40 degrees Celsius.
The microcontroller-based system incorporates zero-voltage switching and a soft-start function to eliminate the lamps’ initial high inrush current – potentially increasing lamp life by as much as 30%. The lamps are switched on for a fixed time period of 5 minutes. This period is reset each time the PIR detects any further movement. Installation is simple and once installed is relatively maintenance free
Feature and Benefits
Significant energy saving - provides heat only when people are present
Temperature monitor – lamps inhibited when ambient temperature exceeds set point
Low-cost and easy to install
Voltage: 230V - 250V AC
Max Load 6000W Infra-red
- Additional Information
upc No length No width No height No Manufacturer No