The IRX range of infra-red wall heaters are a safe & practical source of heat in bathrooms, kitchens, work areas - anywhere where fast localised heating is required.
Heat is provided by two elements operated by a pull cord that gives a choice of 3 heat settings: 800W, 1000W or 2000W. Complete with adjustable beam angle to direct the heat where it is needed.
Model IRX200N. Power rating selectable 800W / 1000W / 2000W. Voltage 230V.
Drip proof protection (IP23 rated).
Dimensions: L764 x H114 x D92
General note about heaters in bathroomsMounting height is generally accepted to be a minimum of 1800mm from the floor. A gap of 200mm should be left either side of the heater. There are no regulations regarding distance above the heater from the ceiling but we advise gap of at least 250mm . This gap may vary depending upon the type of material used in the construction of the ceiling above. If in doubt consult an electrician before purchasing.
- Holiday chalets
- Garages and Workshops
- Utility rooms
- Additional Information
upc No length No width No height No Manufacturer No