Double Beam Sling for use with Infra-red Chandelier Heaters.

This sling is specially made to aid the hanging of heated chandeliers in churches and other buildings with exposed beams. Designed to straddle the King post of the beam structure and comes with a selection of removable links to cater for different chain link sizes.

Technical Specifications:

The post Double Beam Sling for Chandelier Heaters appeared first on Leisure Heating.

Single Beam Sling for use with Infra-red Chandelier Heaters.

This sling is specially made to aid the hanging of heated chandeliers in churches and other buildings with exposed beams. Fits most simple beams and comes with a selection of removable links to cater for different chain link sizes.

Technical Specifications:

The post Single Beam Sling for Chandelier Heaters appeared first on Leisure Heating.

Black Parasol/Marquee Heater Mounting Bracket

This Black Parasol/Marquee Heater Mounting Bracket allows the fixing of an infra-red heater to the underside of a parasol or the inside of a marquee. Its simple clamp design will fit a square horizontal or vertical strut whilst allowing the heater to remain in a horizontal orientation.

The bracket will fit a square section up to 1 3/4 inches (45mm). Simply clamp the bracket with the heater around the stem and tighten the thumb screw.

Note: Always ensure there is a gap between your heater and the fabric of the parasol or marquee.

Technical Specifications:

The post Black Parasol/Marquee Heater Mounting Bracket appeared first on Leisure Heating.

Wall Extension/Ceiling Mounting Bracket for 3.0kW Summerglow Heaters.

This bracket is designed to extend the distance from the wall to the heater or to allow the heater to be safely mounted on a ceiling or beam.

Technical Specifications:

The post Extension/Ceiling Mounting Bracket for 3.0kW Summerglow Heaters appeared first on Leisure Heating.

Adjustable Beam Bracket for use with Infra-red Chandelier Heaters.

This bracket offers a secure and reliable way to mount heated chandeliers onto exposed beams. It’s especially useful in churches, barns, heritage buildings, and other spaces where standard ceiling fixings won’t work.

The design adjusts to fit beams between 6 inches and 9½ inches wide. It comes with removable chain links so you can match different chain sizes and set the hanging height with ease.

Made from durable materials, the bracket provides long-lasting stability and safety. Its simple, discreet design blends neatly into traditional or decorative interiors without drawing attention away from the surroundings.

With this bracket, you can position your infra-red chandelier heaters exactly where heat is needed. The adjustable fit makes installation straightforward, while the solid build gives confidence that the heater will stay secure.

This bracket is ideal for:

• Churches with exposed beams or vaulted ceilings
• Listed or historic buildings where traditional fixings are unsuitable
• Large open spaces such as barns, halls, and function venues
• Any installation where chandelier heaters need precise alignment and secure mounting

Technical Specifications:

The post Adjustable Beam Bracket for Chandelier Heaters appeared first on Leisure Heating.

Description

This chain and bracket assembly enables you to use a parasol heater as a hanging heater under marquees, gazebos and cantilever umbrellas. Simply clamp the parasol heater around the bracket instead of the parasol stem, and suspend from above with the chain.

Note: Always ensure there is a gap between your heater and the fabric above.

Technical Specification

The post Ceiling Mount / Chain Mount Bracket for Parasol Heater appeared first on Leisure Heating.

Double bracket for the Victory Heat Light HLP1000 or VLP10 paint dryer. Can be used in combination with an existing stand to enable you to mount two HLP1000 or VLP10 paint dryers to a single stand.

Specification

The bracket is designed to take two HLP1000 or two VLP10 hand-held Paint Dryers.

Minimum Static operating distance with heater fitted – 500mm (When mounted on its stand).

The post DOUBLE Tripod Bracket for HLP1000 and VLP10 Hand-held Paint Dryer appeared first on Leisure Heating.

Replacement/extra bracket for the Victory HeatLight HLP1000 or VLP10 paint dryer. Can be used in combination with an existing HLP1000s stand/heater combination to allow the addition of a second paint dryer to be attached to the same stand.

Bracket designed to take ONE HLP1000 or ONE VLP10 hand-held Paint Dryer.

Specification

Minimum Static operating distance with heater fitted – 500mm (When mounted on its stand).

The post EXTRA Stand Bracket for HLP1000 and VLP10 Paint Dryer appeared first on Leisure Heating.

White Parasol/Marquee Heater Mounting Bracket. This bracket allows the fixing of an infra-red heater to the underside of a parasol or the inside of a marquee. The simple clamp design will fit to a square horizontal or vertical strut whilst allowing the heater to remain in a horizontal orientation. The bracket will fit a square section up to 1 3/4 inches (45mm). Simply clamp the bracket with the heater around the stem and tighten the thumb screw.

Note: Always ensure there is a gap between your heater and the fabric of the parasol or marquee.

Technical Specification

The post White Parasol/Marquee Heater Mounting Bracket appeared first on Leisure Heating.

The Parasol Mounting Bracket allows the fixing of three heaters on a parasol stem. Will fit parasol stems up to 58mm. Simply clamp the bracket with the heaters around the stem of your parasol, secure the bolt and tighten the thumb screws.

A cost-effective way of adding heat to a parasol, by using standard wall-mounted heaters.

Technical Specification

• Maximum Stem size 58mm
• White powder coat finish

The post Parasol Mounting Bracket appeared first on Leisure Heating.