Description

This 1.0kW Medium-wave Infra-red heater is part of the HEAT INFRA-RED range of process heaters and is designed for many industrial processes including pre-heating, drying and curing of water and solvent-based paints, adhesive curing and many others. It is design particularly lends itself to the heating of a web between reels or over flatbed conveyors to heat products whilst passing beneath.

This unit is built to industrial standards and is designed for industrial and commercial use. The unit comes complete with pre-drilled fixing holes and 0.5m lead using Copex.

Features and Benefits

• 1.0kW of medium-wave Infra-red
• Rapid heat-up time. 1 minute to 85% power, 2 minutes to full power from cold. Very responsive to power control when pre-warmed.
• 500mm heated width and giving up to 600mm x 700mm of heating area depending on distance from substrate.
• Ideal for conveyorised systems or fabric moving from reel to reel.

 

Specification

• Voltage: 230V – 250V AC
• Current: 4A single phase
• Wattage: 1 x 1.0kW medium-wave infra-red element – cassette type FSQ1000
• Collective element size: 65mm x 250mm
• Heater dimensions: 300mm x 200mm x 100mm
• Fixing: 6mm fixing holes (x2) at each end for mounting by chain (not supplied) or by bolting to mounting brackets (not supplied)
• Lead length: 0.5m in complex.

We can manufacture this product to specific size requirements.  Please call 0115 937 2727 for more information.