This 2kW Medium-wave Infra-red heater is part of the HEAT INFRA-RED range of process heaters and is designed for many industrial prcesses including pre-heating, drying and curing of water and solvent based paints, adhesive curing and many others. Its design particularly lends itself to the heating of a web between reels or over flatbed conveyors to heat product whilst passing beneath.
The unit comes complete with pre-drilled fixing holes and 2m of mains lead.
This unit is built to industrial standards and is designed for industrial and commercial use. It is not recommended for domestic use e.g. for heating people.
Features and Benefits
2kW of medium-wave Infra-red
Rapid heat-up time. 1 minute to 85% power, 2 minutes to full power from cold. Very responsive to power control when pre-warmed.
500mm heated width and giving up to 600mm x 700mm of heating area depending on distance from substrate.
Ideal for conveyorised systems or fabric moving from reel to reel.
Voltage: 230V - 250V AC
Current: 10A single phase
Wattage: 2 x 1kW medium-wave infra-red element - cassette type FSQ1000
Collective element size: 65mm x 500mm
Heater dimensions: 600mm x 140mm x 100mm
Fixing: 6mm fixing holes (x2) at each end for mounting by chain (not supplied) or by bolting to mounting brackets (not supplied)
Lead length: 2m 3-core silcone cable.
We can manufacture this product to specific size requirements. Please call 0115 937 2727 for more information.
- Additional Information
upc No length No width No height No Manufacturer No