Description
The Stiebel Eltron infra-red wall heater is a safe & practical source of heat in bathrooms, kitchens, work areas – anywhere where fast localised heating is required.
The heater has a selection of two power outputs, 400W, 800W and 1200W, switched via an integrated pull cord. It is designed to provide rapid beamed warmth and has an adjustable beam angle to direct heat where it is most needed.
Technical Specification
Model IW 120 Power 400W, 800W or 1200W. Voltage 230V.
IPX4 rated safe for zone 1 and zone 2 in bathrooms
Dimensions: W535 x H145 x D85
Weight 1.6kg
Ideal For
- Bathrooms
- Conservatories
- Holiday chalets
- Garages and Workshops
- Summerhouses
- Utility rooms
General note about heaters in bathrooms
Mounting height is generally accepted to be a minimum of 1800mm from the floor. A gap of 300mm should be left either side of the heater. There are no regulations regarding distance above the heater from the ceiling but we advise gap of at least 250mm . This gap may vary depending upon the type of material used in the construction of the ceiling above. Some manufactuers recommend a minimum of 400mm above the heater to the ceiling but this make installation impossible in some modern homes with low ceilings. If in doubt consult an electrician before purchasing.
Reviews
There are no reviews yet.