Traditional 1800W Radiant Infra-red Bathroom Heater.
Heat is provided by three elements operated by a pull cord that gives a choice of 3 heat settings: 600W, 1200W or 1800W. Complete with adjustable beam angle to direct the heat where it is needed.
Power rating: Selectable 600W / 1200W / 1800W.
IP Rating: Splash proof protection (IPX4 rated) for use in bathrooms.
Dimensions: W570mm x H150mm x D60mm approx.
Designed and manufactured in Germany
General note about heaters in bathroomsMounting height is generally accepted to be a minimum of 1800mm from the floor. A gap of 200mm should be left either side of the heater. There are no regulations regarding distance above the heater from the ceiling but we advise gap of at least 250mm . This gap may vary depending upon the type of material used in the construction of the ceiling above. If in doubt consult an electrician before purchasing.
- Holiday chalets
- Garages and Workshops
- Utility rooms
- Additional Information
upc No length No width No height No Manufacturer No