Description
The Dimplex infra-red wall heater is a safe & practical source of heat in bathrooms, kitchens, work areas – anywhere where fast localised heating is required.
The heater has a power output of 500W switched on via an integrated pull cord. It is designed to provide rapid beamed warmth and has an adjustable beam angle to direct heat where it is most needed.
Technical Specification
Model IRX50 Power 500W. Voltage 230V.
Drip proof protection (IP24 rated).
Dimensions: L764 x H100 x D92
Weight 1.6kg
Ideal For
- Bathrooms
- Garages and Workshops
- Summerhouses
- Utility rooms
General note about heaters in bathrooms
Mounting height is generally accepted to be a minimum of 1800mm from the floor. A gap of 300mm should be left either side of the heater. There are no regulations regarding distance above the heater from the ceiling but we advise gap of at least 250mm . This gap may vary depending upon the type of material used in the construction of the ceiling above. Some manufactuers recommend a minimum of 400mm above the heater to the ceiling but this makes installation impossible in some modern homes with low ceilings. If in doubt consult an electrician before purchasing.
Reviews
There are no reviews yet.