Description

Description

36kW Medium-wave Infra-red Retro-fit Bay for PED Contraflow Oven.

Easily upgrade your oven with a simple, low-cost conversion from metal-sheathed long-wave infrared emitters to more efficient medium-wave infrared. Developed in collaboration with East Midlands Electricity, this system increases oven efficiency by at least 30%.

This set of six 6kW modules is designed as a direct replacement for the original heating panels. Installation is straightforward, just disconnect the existing electrical connections, remove the old panels, and fit the new modules in their place.

Oven Conversion:

Fast-response medium-wave “cassette” emitters, mounted on insulated reflector panels, directly replace the original metal-sheathed elements. These cassette arrays match the power rating and wiring configuration of the existing emitters, allowing you to retain your current wiring and controls without upgrading the electrical supply, keeping conversion costs low.

You can choose to convert all oven zones or only selected areas to best meet your process requirements. The conversion process is quick and minimally disruptive, typically completed within a few hours.

How it Works:

In contraflow-type ovens, convective (hot-air) loss is the primary source of inefficiency. Medium-wave infrared significantly increases the amount of radiant energy delivered directly to the products, compared to long-wave emitters. As a result, less convective heat is generated, leading to a noticeable improvement in overall oven efficiency.

Benefits:

Converting to medium-wave infrared offers two key benefits: increased throughput with no rise in energy costs, or lower energy consumption while maintaining the same output. While exact performance gains vary by product, recent tests show processing time reductions of at least 30%.

The new system also features a rapid response time—reaching operating temperature in just 30 seconds, compared to the 5 minutes required by long-wave emitters. This quick heat-up allows for further energy savings by switching the system off during short production breaks or integrating automatic product detection.

Efficiency Trials:

Numerous contraflow ovens have been successfully converted using a combination of retrofitted, wavelength-specific medium-wave heater panels and burst-fire control. Trials conducted on a variety of products with these upgraded ovens consistently demonstrate significantly improved performance.

Applications:

• Drying and curing of water-based and solvent-based coatings
• Bonding using thermoplastic and thermosetting materials
• Curing powder coatings
• Preheating castings and moulding

Specifications:

• These modules are built as a direct replacement for the original electric heating panels. The 36kW set of heaters is normally positioned in the first bay of the PED oven.
• Voltage: 340/415V AC
• Wattage: Six panels each comprising 6 x 1kW medium-wave infra-red element – cassette type FSQ1000.
• Module Dimensions: 595mm Width, 380mm Height, 100mm Depth (excluding reflector which sits proud of the front).

We can manufacture this product to specific requirements. Please call 0115 937 2727 for more information.